Source for replacement LC case back? Log Out | Topics | Search
Moderators | Register | Edit Profile

Classicwatch discussion fora » Jaeger-LeCoultre Forum » Archived Messages 2007 » Source for replacement LC case back? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Blgg
New member
Username: Blgg

Post Number: 111
Registered: 04-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, September 02, 2007 - 09:17 pm:   

I have this 33mm s/s LC,
cal. 450 with Geneva Stripes,
BUT NO CASE BACK.

Is there a source for case backs, or is all the work fully custom?
As I am very fond of the 449/450 movements, I thought I might as well get one with a glass inset.

I'd appreciate any direction. Thanks.

1
Top of pagePrevious messageNext messageBottom of page Link to this message

Zaf
Moderator
Username: Zaf

Post Number: 2766
Registered: 05-2003

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, September 05, 2007 - 11:23 am:   

Looks like you will need a donor watch...
Top of pagePrevious messageNext messageBottom of page Link to this message

Blgg
New member
Username: Blgg

Post Number: 112
Registered: 04-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, September 05, 2007 - 12:16 pm:   

The case appears to me the same as a JLC s/s with 478.
Not the same case as most LC s/s of the era.

... got one, by chance? <g>

Actually, I wouldn't mind a glass back - so I can gaze at the 450 -- but it will toilet the collector value, I imagine.

not seen a 2-tone, or an original (the 2 in Past Prices are redials) -- perhaps this is original.
Top of pagePrevious messageNext messageBottom of page Link to this message

Zaf
Moderator
Username: Zaf

Post Number: 2767
Registered: 05-2003

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, September 05, 2007 - 07:19 pm:   

Can you ball park the diameter of the back? I might have one.
Top of pagePrevious messageNext messageBottom of page Link to this message

Blgg
New member
Username: Blgg

Post Number: 114
Registered: 04-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, September 05, 2007 - 09:47 pm:   

Thank you! --

I don't have it yet. When it arrives, I'll send you an exact measurement.

If the case is the model I think it is, it's a snap back similar to the JLCs with 'POUR DEBOITER' etc. on the inside, like the photo below.

Dimensions on it are 33mm to the outside, a hair under 29mm inside the snap ring.

1
Top of pagePrevious messageNext messageBottom of page Link to this message

Blgg
New member
Username: Blgg

Post Number: 121
Registered: 04-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Saturday, September 08, 2007 - 05:25 pm:   

Hello Zaf,

The case back in the photo above fits perfectly - it is the same 33mm case as a JLC s/s with 478.

Interesting thing about the dial and the 2 tone effect - depending on the angle of the light, the contrasting center dark shade will be either very distinct, or in moving my wrist a bit, entirely disappear. Some sort of light refraction layer in the finish? Very neat!

Than you for your help.
b