| Author | Message | ||
     Artinfo Junior Member Username: Artinfo Post Number: 23 Registered: 09-2008 Rating: N/A |
Do you have any info on this kind of Zenith dial? Steel case measures 35mm ; steel back ; is it genuine or restored (new) dial? Thx Regards | ||
| Artinfo Junior Member Username: Artinfo Post Number: 24 Registered: 09-2008 Rating: N/A |
Picture    | ||
| Artinfo Junior Member Username: Artinfo Post Number: 25 Registered: 09-2008 Rating: N/A |
Additional information ; movement serial number start with 322XXXX which means that watch has been made in spring 1940 ?! Thx  | ||
| Gatorcpa Intermediate Member Username: Gatorcpa Post Number: 139 Registered: 11-2006 Rating: N/A |
Dial is a modern interpretation of a 1940's "Scientific" design. Many watch companies had similar dials. This one looks like it was redialled recently. Hope this helps, gatorcpa | ||
| Zaf Moderator Username: Zaf Post Number: 5744 Registered: 05-2003 Rating: N/A |
I'd agree with the above post as well. Hard to tell if Zenith ever had that design. It's similar to some IWC dials that looked like that. | ||
| Artinfo Junior Member Username: Artinfo Post Number: 31 Registered: 09-2008 Rating: N/A |
I still did not found in archives about this Zenith dial. On the Internet I found the Omega from 1942 with a similar dial?!  | ||
| Zaf Moderator Username: Zaf Post Number: 5761 Registered: 05-2003 Rating: N/A |
The Omega dial you are showing is definitely refinished. | ||
| Artinfo Junior Member Username: Artinfo Post Number: 32 Registered: 09-2008 Rating: N/A |
Yes,also says the owner,noting that was restored to its original dial from 1942. |